2. Maintenance Methods
19
• Do not leave media loaded on the platen. This may leave irregularities or ripples in the media.
When the machine is not in use, raise the clamp lever to separate the pinch rollers from the grit
rollers.
• Leaving the pinch rollers in the lowered position may cause the pinch rollers to become
deformed and prevent the media from feeding properly.
• Leaving media set in place can cause the media to be pressed down by the pinch rollers,
resulting in pinch roller marks.
• Perform the following if the "Check Waste Ink Tank" message appears on the display.
"Waste Ink Tank Replacement"(P. 29)
To Next Page
Loading...
