Minarik AC200 SERIES User Manual

27
3. Press ENTER. The display will read TESTING MASTER while the EPM Programmer
checks the validity of the Configuration EPM. The display will then ask for confirmation
to load the new configuration.
NOTE: If the EPM installed in the MASTER AND CONFIGURATION PORT is not a
Configuration EPM, the display will read INVALID CFG DATA.
4. Press ENTER to confirm that the new configuration is to be loaded. Once the new
configuration is loaded, data files with the same parameter version can be edited using the
EDIT DATA FILE function (refer to Section 5.2.4).

Minarik AC200 SERIES Specifications

General

Brand	Minarik
Model	AC200 SERIES
Category	Controller
Language	English