Note: Exposure to absolute maximum rated conditions for extended periods may affect device reliability.
Ensure that the engine is properly connected before powering on the engine. Poor power connection,
live connection, instantaneous high pulse, etc., may damage the electronic components of the engine,
causing the engine to not work.
3-2-2 Power supply noise
VIN_3V3_IMGR：Vpp < 100mV
VIN_3V3_LED：Vpp < 200mV
It is recommended to use a low noise power supply so that the engine can be used for maximum
performance. High noise power supply will reduce engine scanning performance.
To Next Page
Loading...
