A - 5
A.3 Physical Specifications
A.4 Hardware Specifications
A.4.1 Display Screen
A.4.2 Recorder
A.4.3 LEDs
A.4.4 Audio Indicators
DC power input
Input voltage 12.4 to 30.3 VDC
Input current 15.5 to 6.5A
Dimensions (W × D × H) • 275 mm×160 mm×280 mm (including the handle, excluding external
paddles)
• 275 mm×155 mm×280 mm (including the handle, configured without
the paddle tray)
Maximum weight • 4.3 kg (the equipment is configured with AC power input, 3-/5-lead ECG
and manual defibrillation)
• 3.9 kg (the equipment is configured with DC power input, 3-/5-lead ECG,
manual defibrillation but without the paddle tray)
Screen type Capacitive, multi-point color touchscreen
Screen size 9 inch
Resolution 1200×1020 pixels
Viewed waveforms 7 at maximum
Wave viewing time 36s at maximum (ECG)
Method High-resolution thermal dot array
Horizontal resolution 16 dots/mm (25 mm/s paper speed)
Vertical resolution 8 dots/mm
Paper width 110 mm
Paper speed 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s. Error no more than ± 5%
Number of waveforms 6 at maximum
Grid lines Printing can be configured with or without grid lines
Alarm lamp 1 (two color-coded: red and yellow)
Power-on LED 1 (green)
Battery LED 1 (two color-coded: yellow and green)
Status indicator 1 (two color-coded: red and green)
Speaker Gives alarm tones (45 to 85 dB), key tones, QRS tones
Supports PITCH TONE and multi-level tone modulation
Alarm tones comply with IEC60601-1-8.
To Next Page
Loading...
