3-24 System Installation
a) Please select the network type according the actually status, Select “DHCP”,
click [OK].
b) Or, select “Static”, and input the IP address, subnet mask and gateway, then click
[OK].
To select the network connection mode
If “DHCP” is selected, IP address will be automatically
obtained from DNS server; if “Static” is selected (using static
IP address), you need to enter the IP address.
IP address of the system should be at the same network
segment with the server IP.
Used to set different network segment.
Used to set the gateway IP.
To Next Page
Loading...
Need help?
General
