System Introduction
1-7
<9>
<8>
<7>
<6>
Left View
No. Part Introduction
<1> Monitor Display images and parameters, etc. 14″ monitor
<2> Transducer cable
hanger
Hook for the transducer cable
<3> Transducer holder Place the transducer provisionally
<4> Transducer socket Connect or disconnect the transducer with the main unit
<5> Footswitch socket Connect or disconnect footswitch
<6> Control panel
User interface
<7> Handle Move the system
<8> CD-RW
Backup the data in hard disk or USB storage device into a
CD, or read out the files from a CD.
<9> Power switch Power on / off
To Next Page
Loading...
