S-2
3. Safety Precautions
Please observe the following precautions to ensure patient and operator safety when using
this system.
DANGER: Do not use flammable gasses such as anesthetic gas, oxygen or
hydrogen, or flammable liquids such as ethanol, near the system,
because there is danger of explosion.
WARNING:
1． Do connect the plugs of the system and peripherals connected to
the system to the wall receptacle meeting the ratings indicated on
the rating nameplate. Using adapter or multi-functional receptacle
may affect the system’s grounding performance and thus cause
leakage current exceeding safety requirement.
Be sure to connect the video printer to the designated AC outlet on
the system with the provided cable. Using other cables may cause
electric shock.
2． Be sure to connect the potential-equalization lead wire before
inserting the system power plug into the receptacle and be sure to
remove the system power plug from the receptacle before
disconnecting the wire, in order to avoid electric shock.
3． Connect the earth conductor only before turning ON the system.
Disconnect the grounding cable only after turning OFF the system.
Otherwise, electric shock may result.
4． For the connection of power and grounding, follow the appropriate
procedures described in the operation manual. Otherwise, there is
risk of electric shock. Do not connect the grounding cable to a gas
pipe or water pipe, otherwise functional grounding may not be
effective or there may be risk of a gas explosion.
5． Before cleaning the system, be sure to disconnect the power cable
to avoid electric shock.
To Next Page
Loading...
