Mindray MX8

16 - 14 Operator’s Manual
16 Probes and Biopsy
16.1.8 Storage and Transportation
When all examinations for the day have been completed, confirm that the probe is in good
condition. After disinfecting the probe, confirm that the probe is in good condition and stored in a
suitable place
• To prevent the probe from being damaged, DO NOT store it in locations where it may be
exposed to:
– Direct sunlight or X-rays
– Sudden changes in temperature
–Dust
– Excessive vibration
– Heat generators
V11-3Hs Operating 0°C ~ 40°C 20% ~ 85% 700 hPa ~ 1060 hPa
Storage and
transportation
-20°C ~ 55°C 20% ~ 95% 700 hPa ~ 1060 hPa
L11-3VNs Operating 0°C ~ 40°C 20% ~ 85% 700 hPa ~ 1060 hPa
Storage and
transportation
-20°C ~ 55°C 20% ~ 95% 700 hPa ~ 1060 hPa
L12-3RCs Operating 0°C ~ 40°C 20% ~ 85% 700 hPa ~ 1060 hPa
Storage and
transportation
-20°C ~ 55°C 20% ~ 95% 700 hPa ~ 1060 hPa
L13-3s Operating 0°C ~ 40°C 20% ~ 85% 700 hPa ~ 1060 hPa
Storage and
transportation
-20°C ~ 55°C 20% ~ 95% 700 hPa ~ 1060 hPa
L14-6Ns Operating 0°C ~ 40°C 30% ~ 85% 700 hPa ~ 1060 hPa
Storage and
transportation
-20°C ~ 55°C 30% ~ 95% 700 hPa ~ 1060 hPa
L20-5s Operating 0°C ~ 35°C 15% ~ 80% 700 hPa ~ 1060 hPa
Storage and
transportation
-20°C ~ 60°C 15% ~ 90% 500 hPa ~ 1060 hPa
L13-3Ns Operating 0°C ~ 40°C 20% ~ 85% 700 hPa ~ 1060 hPa
Storage and
transportation
-20°C ~ 55°C 20% ~ 95% 700 hPa ~ 1060 hPa
P4-2s Operating 0°C ~ 40°C 30% ~ 85% 700 hPa ~ 1060 hPa
Storage and
transportation
-20°C ~ 55°C 30% ~ 95% 700 hPa ~ 1060 hPa
SP5-1Ns Operating 0°C ~ 40°C 20% ~ 85% 700 hPa ~ 1060 hPa
Storage and
transportation
-20°C ~ 55°C 20% ~ 95% 700 hPa ~ 1060 hPa
Table 16-2 Probe Environmental Conditions
Probe
Model
Conditions Ambient
temperature
Relative humidity
(no condensation)
Atmospheric
pressure