4 Setup
Operator’s Manual 4 - 33
Set the MPPS service as the default when using the MPPS.
Storage Commitment Setting
DICOM storage commitment setting items are described as follows:
Query/Retrieve
DICOM query/retrieve setting items are described as follows:
HL7 Query Service Preset
The protocol version that the ultrasound system supports: V2.3, V2.4, V2.5, V2.6.
Name NOTE
Device Name After you set the server (s) in DICOM Server Setting, the name (s) will
appear in the drop-down list, select the name of the storage commitment
server.
DICOM Service Name Default is server-SC, and it can be modified.
AE Title Application Entity title. Here, it should be consistent with that of the
storage commitment server.
Port DICOM communication port, 104 by default. Here, the port should be
consistent with that of the storage commitment server port.
Maximum Retries Reserved feature.
Interval Time(s) Reserved feature.
Timeout Refers to the amount of time after which the system will stop trying to
establish a connection to the service.
Associated Storage
Service
The associated storage server is preset before storage commitment, only
after the exam is sent out, can storage commitment be created.
TLS Transport Layer Security. Select whether to encrypt the data during
network transportation.
Item Description
Device Name Select the name of a device that can be added (including the local).
Service Name Default is server-queryRetrieve, and it can be modified.
AE Title Application Entity title.Here, it should be consistent with that of the
storage commitment server.
Port DICOM communication port, 104 by default.Here, the port should be
consistent with that of the storage commitment server port.
Maximum Retries Reserved feature.
Interval Time(s) Reserved feature.
Timeout Refers to the amount of time after which the system will stop trying to
establish a connection to the service.
TLS Transport Layer Security. Select whether to encrypt the data during
network transportation.
To Next Page
Loading...
Need help?
General
