Mindray Resona 7 - Page 98

5-8 Function and Performance Checking Method
 M mode
 In M mode scanning, the image parameter area in the upper left corner of the screen displays
the real-time parameter values as follows:
Parameter
F
D
G
V
DR
Meaning Frequency Depth M Gain M speed M Dynamic Range
 Parameters that can be adjusted to optimize the M Mode image are indicated in the following.
Control Panel Gain, Depth, TGC, Focus position
Touch Screen
Speed, Display Format, Gray Map, Dynamic Range, Tint Map, M Soften, Edge
Enhance
 Color mode
 In Color mode scanning, the image parameter area in the upper left corner of the screen
displays the real-time parameter values as follows:
Parameter
F
G
PRF
WF
Meaning Frequency Color Gain Pulse Repetition Frequency (PRF) Color Wall Filter
 Parameters that can be adjusted to optimize the Color Mode image are indicated in the
following.
Control Panel Gain, Depth, iTouch, Scale
Touch Screen
Invert, Baseline, B/C Wide, Dual Live, Image quality, Flow State, Priority, Packet
Size, Map, Wall Filter, Line Density, Smooth, Persistence, Velocity Tag, steer
 Power mode
 In Power mode scanning, the image parameter area in the upper left corner of the screen
displays the real-time parameter values as follows:
Display
F
G
WF
PRF
Parameter Frequency Power
Gain
Power Wall
Filter
Pulse
Repetition
Frequency
 PW/CW mode
 The parameters will be displayed in the image parameter area on the left part of the screen as
follows:
Display
F
G
PRF
WF
SVD
SV
Angle
Parameters
Frequency Gain Pulse
Repetition
Frequency
WF
(Wall
Filter)
SV
Position
SV Size
(only CW )
Angle
Echo Boost
B image touch screen-[Echo
Boost].
[Echo Boost] is enabled when it is on in B mode. (Highlighted) the
system is in “Echo Boost” status.