Setup 12-13
Factory Default: the system is in factory state by default.
User Define: add a user-defined password.
1) Select [User Define]. If the patient data are already stored in the hard disk, the system
prompts the following message: (if no patient data are stored in the hard disk, perform steps 5
to 6 directly)
2) Tap [OK] to return to the Security screen, tap [Wipe], and the system prompts the following
message:
3) Tap[OK], and the system prompts the following message:
4) Tap [Yes] to wipe the patient data.
5) Select [User Define] and tap [Confirm].
6) Input the password and tap [Confirm] to finish the password setting.
1. If you want switch to Factory Default, you should enter user defined
password and perform steps 1 to 6 again. The password is the same as
that of the User Define.
2. When you set password, multi-language and Chinese characters are not
supported.
2. Anti-Virus
The system provides two anti-virus software: Windows Defender and McAfee. They can effectively
prevent the ultrasound system from being attacked by virus, spyware, or other malware.
If the McAfee software is installed, the system displays “McAfee is installed”; if not, the system
displays “McAfee is not installed”. The McAfee software is an option. If you want to buy McAfee,
contact Mindray service engineers.
1. McAfee cannot be uninstalled after successful installation.
To Next Page
Loading...
Need help?
General
