Mindray TE7T User Manual

Wireless LAN A-3
 IP Configuration
NOTE:
When the system background is processing network task (DICOM sending for example),
please do not enter network setting to change the IP, otherwise the background task may
fail. You can check if there are tasks undergoing in the task manager.
IP configuration is used for setting local network parameters, which is also applied to DICOM
connection.
1. In Wireless network manager screen, tap [IP Config] to open the page:
 If “DHCP” is selected, the IP address will be automatically obtained from the DNS server.
 Tap [Refresh] to check current IP address.
 If “Static” is selected (using a static IP address), enter the IP address.
 IP address of the system should be in the same network segment with the server.
 Subnet Mask: set different network segment.
 Gateway: set the gateway IP.
 Host Name: displays the machine name of the system, if changed, the system should be
restarted.
2. Tap [Save] to save current setting or tap [Cancel] to exit.
NOTE:
If the IP address displays as 0.0.0.0, this means that the network is abnormal. The reason
for the failure may be disconnection or the system cannot obtain the IP address.
 EAP Network
For setting EAP network, contact Mindray Customer Service Department or the sales representatives.

Mindray TE7T Specifications

General

Brand	Mindray
Model	TE7T
Category	Medical Equipment
Language	English