Barcode Reader C-3
code 39 full ASCII scanning:
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character
set. To enable or disable Code 39 Full ASCII, scan the appropriate barcode below.
I 2 of 5 symbols setting:
Select this option to decode only I 2 of 5 symbols containing a selected length. Select the length using
the numeric barcodes below. For example, to decode only I 2 of 5 symbols with 8 characters, scan I 2
of 5 - One Discrete Length, then scan 0 followed by 8.
C.1.4 Scanning in Hand-Held Mode
1. Ensure all connections are secure.
2. Aim the reader at the barcode. Press the trigger.
To Next Page
Loading...
