Mindray TE7T User Manual

Barcode Reader C-5
C.1.5 Scanning in Hands-Free Mode
C.1.5.1 Assembling the Intellistand
NOTE Before tightening the wingnut under the base, ensure that the flat areas on the flexible neck fit
securely in the grooves in the base.
C.1.5.2 Mounting the Stand (optional)
You can attach the base of the reader’s stand to a flat surface using two screws or double-sided tape
(not provided).
 Screw Mount
1. Position the assembled base on a flat surface.
2. Screw one #10 wood screw into each screw-mount hole until the base of the stand is secure
 Tape Mount
1. Peel the paper liner off one side of each piece of tape and place the sticky surface over each of the
three rectangular tape holders.

Mindray TE7T Specifications

General

Brand	Mindray
Model	TE7T
Category	Medical Equipment
Language	English