Mindray TE7T User Manual

Image Optimization 5-11
5.3.3 M Mode Image Optimization
Gain
Description
To adjust the gain of M mode image. The real-time gain value is displayed in the
image parameter area in the top-left corner of the screen.
Operations
Drag the [Gain] control on the right part of the image area to adjust the gain.
Effects
Increasing the gain will brighten the image and you will see more received
signals. However, noise may also be increased.
Display Format
Description
To set the display format of M mode images and B mode images.
Operations
Select different layout through [Display Format].
Effects
Select different format types according to the actual situation and obtain a
desired analysis through comparison.
Speed
Description
This function is used to set the scanning speed of M mode imaging, and the real-
time speed value is displayed in the image parameter area in the top-left corner
of the screen.
Operations
Adjust through [Speed(mm/s)] on the menu.
Effects
Changing speed makes it easier to identify disorders in cardiac cycles.
Tint Map
Description
This function provides an imaging process based on color difference rather than
gray distinction.
Operations
Select maps or turn on/off the function by using [Tint Map] control.
Gray Map
Description
This function applies the gray correction to obtain optimum images.
Operations
Select maps by using [Gray Map] control.
Edge Enhance
Description
This function is used to enhance the image profile so as to distinguish the image
boundary for optimization.
Operations
Adjust through [Edge Enhance] on the menu.
The bigger the value the stronger the effect. 0 represents no edge enhance
effect.
Impacts
Larger edge enhance may lead to increased noise.

Mindray TE7T Specifications

General

Brand	Mindray
Model	TE7T
Category	Medical Equipment
Language	English