Mindray Z50BW

11-10 Setup
 Print Service Setting
 Add Service: click to begin print service adding.
 Remove Service: click to delete the selected print service.
 Rename Service: click to rename the selected print service.
 Property: to preset the property of print services.
 Printer Driver Setting
Printers listed in the operator’s manual are all supported by the system, no drive is
required.
Click [Print Driver] page to enter printer driver setting screen:
 Display the printer name as well as print status.
 You can add printer including network printer.
 Check the printer attribute.
For details about DICOM print, please refer to “10 DICOM”.
 Printer Adapter
For details, please refer to the “Appendix D Printer Adapter”.
11.7 Network Preset
 For local TCP/IP Setting and DICOM preset, please refer to “10.1 DICOM Preset”.
 The iStorage screen is as follows:
Name
Description
Service Name
Name of the device, cannot be empty
Port
Port for transmitting.