Mindray Z50BW User Manual

3-8 System Preparation
3. Enter [Setup]->[Print Preset]->”Printer Driver” page, click [Add Network Printer] to enter
the screen, type in the IP address of the network printer. (Port is 9100 in default).
4. Click [Verify Net Printer], the IP address, name and port information of the network printer
will be displayed under the “Port” box. Change the port to match the verified printer
information if necessary.
5. Click [OK] to enter the ppd installing screen:
 Select PPD file from media: select the path from the external media and install.
 Select PPD file from database: select the ppd. file integrated in the ultrasound system.
6. After the ppd. file is installed completely, enter the printer name to finish the installation.
7. After installation succeeds, the system returns to the “Printer Driver” page and displays
the added network printer.
3.7.1.3 Add Shared Printer
1. Make sure the target computer or the server (to be connected to the ultrasound system
with the shared printer) has set a shared printer (under Windows operating system, enter
[Printers and Faxes] and right click the target printer and select “Share” to set).
2. As the system is connected into the LAN, open [Setup]-> [Print Preset]-> “Printer
Driver“ screen.
3. Click [Add Shared Printer], and input information of the printer (IP Address, User Name,
Workgroup and password of the computer or server, and Shared Printer Name).
4. Click [Verify] to verify the connection, and click [OK] if the system prompts normally.
5. Select the ppd. file in the displayed dialogue box: you can either select from the
ultrasound system integrated database, or media (USB disk).
6. Enter the name for the printer and click [OK], the system then starts installation. After
installation succeeds, the system returns to the “Printer Driver” page and displays the
added shared printer.
NOTE:
1.
Before connecting the shared printer, make sure the ultrasound system and
the computer or server (connected with shared printer) are in the same
network domain, and the network is working normally.
2.
The IP address and the server name should be valid, e.g. \\10.2.40.123 or
\\5-HP, otherwise, the system will fail to connect.
3.
If the server has set accessing limitation, the system will prompt a dialogue
box to identify the user. Enter the correct user name, domain name and
password, and then click [OK].
3.7.1.4 iStorage UltraAssist Print
The system supports printing by iStorage function. Before using this function, please make sure
that the iStorage server has configured a defaulted printer, and the ultrasound system has
configured an iStorage server. For details, please refer to “11.7 Network Preset”.
1. Enter [Setup]->[Print Preset]->”Printer Driver” and check iStorage printer status, which
should be AssistPrinter@IP address with “Ready” status.
2. Click “Print Service” to enter the screen, and select AssistPrinter@IP address to be the
printer for the Report Print service.
3. Click [Save] .
3.7.1.5 Print Service
You can use a graph/ text printer to print report or images.

Mindray Z50BW Specifications

General

Brand	Mindray
Model	Z50BW
Category	Medical Equipment
Language	English