Ground Balance
Reducing Ground Noise
The ground contains not only sand but also many
different chemicals, minerals and salts. These extra
materials are referred to as ground mineralisation.
This ground mineralisation may often produce
erratic sounds known as ‘ground noise’.
The Ground Balance (GB) function minimises ground
noise ensuring signals from targets, such as gold
nuggets, are not confused with false ground signals.
The GPX-4500 has the ability to cancel out the
effects of ground mineralisation automatically, and
the Tracking function will maintain a perfect Ground
Balance while you search.
Tracking
Tracking instructs the detector to cancel the effects
of ground mineralisation, and will automatically
adjust the Ground Balance setting when ground
conditions change during detecting.
Tracking is preferred in heavily mineralised ground,
especially where the mineralisation is changeable,
or when you want to cover a large area quickly
and efficiently.
Fixed
Fixed holds the last Ground Balance setting. In
ground where conditions allow Fixed will provide
greater depth, sensitivity and sharper target signals,
provided a perfect Ground Balance is maintained.
Fixed will give slightly improved performance but
will require re-balancing (pg. 42) when necessary.
Using the Quick-Trak button is an easy way to do this.
Note: Where possible, always search in Fixed GB to
maximise depth and sensitivity, and only use Tracking
in areas with excessive ground noise and/or rapidly
changing mineralisation, often referred to as
variable ground.
Quick-Trak Button
The Quick-Trak button found on the handle
assembly allows you to temporarily switch between
Fixed and Tracking or vice versa.
The Quick-Trak button only changes the Ground
Balance position (Fixed or Tracking) while the button
is pressed. Once the button is released the Ground
Balance setting returns to the switch position
selected on the front control panel.
The Quick-Trak button will most commonly be used
to Ground Balance the detector, and also to fix or
hold the Ground Balance setting while pinpointing.
To Next Page
Loading...
Need help?
General
