Minelab GPX 6000 Pocket Guide

Manual Sensitivity Adjustment
Procedure
Always try the
Noise Cancel Procedure and the
Quick-Trak Ground Balance Procedure to
resolve noise before reducing the
sensitivity level.
Generally start with a Mono coil unless
you are detecting in areas with known
high levels of EMI or soil conductivity.
START 
1. Set sensitivity to
level 1.
2. Increase until false
signals occur.
3. Reduce by one level.
4. Check over ground and
reduce if needed.
Return to Contents

Minelab GPX 6000 Specifications

General

Technology	GeoSense-PI
Weight	2.1 kg (4.6 lbs)
Battery Type	Rechargeable Lithium-ion
Battery Life	Up to 8 hours
Display	LCD
Warranty	3 years
Operating Frequency	Multi-frequency
Ground Balance	Automatic and Manual
Manufacturer	Minelab
Coil Options	11" Monoloop, 14" DD, 17" Monoloop
Audio Output	Built-in speaker
Headphones	Wireless headphones included
Water Resistance	Coil waterproof to 1 m (3 ft)