miniDSP Flex Eight - Page 47

3/15/23, 9:47 AM
Print or save - miniDSP Flex Eight
https://docs.minidsp.com/product-manuals/flex-eight/print_page.html
47/75
INVERT
0 DB
Right In
INVERT
0 DB
Right In
INVERT
0 DB
Left In
0 DB
INVERT
INVERT
0 DB
Right Woof
Left In
0 DB
INVERT
0 DB
INVERT
0 DB
INVERT
INVERT
0 DB
0 DB
INVERT
INVERT
0 DB
0 DB
INVERT
INVERT
0 DB
Left Woof
Right In
INVERT
0 DB
INVERT
0 DB
Left In
INVERT
0 DB
Right In
Left Tweet
Right In
UnusedUnusedUnusedUnusedRight Tweet
Left InLeft InLeft InLeft InLeft In
Right InRight InRight InRight In
The left input is routed to outputs 1 and 3, and the right input is routed to outputs 2 and 4. Each output channel will
need a low pass lter for the woofers or a high pass lter for the tweeter.
Three-way active speaker and dual subs
The diagram below shows the connections for a three-way active speaker with dual subwoofers. Amplication for the
speaker drivers can be either a multichannel amplier, or a set of stereo ampliers.
1
3
5
2
Input sources
4
6
Left woofer
Left mid
Left tweeter
Left woofer
Left mid
Left tweeter
Multichannel
power amplifier
8
7
Powered
subwoofer
Powered
subwoofer
miniDSP
Processor
Connecting a three-way active speaker and dual subwoofers using the
miniDSPFlexEight
The routing for this system is: