MBE059F03
22 / 32
19. Check belt speed
※ In single mode - LED lamp is off.
MANUAL
SINGLE
Press once .
The PRM LED lamp turns on and the target window will show the belt
speed.
Press to exit .
20. IN/MM Conversion
The dedicated MM/INCH key allows for immediate switch of the units
between millimeters and inches. The LEDs on the key indicate the selected
unit. Switching between MM and INCHES has no effect on the control
functions.
When this LED lamp twinkles – MM mode
MM
INCH
When this LED lamp twinkles – INCH mode