Minikol M15S - Page 7

MBE059F03
4 / 32
2.3. Example：
Assume:
actual target value on display = 100.00mm;
actual real value on display = 100.00mm
To change the target value to 20.25mm
Step 1 : Press Æ the LED lamp on Target window is blinking.
PROG
１００００
１００００
Display
Target value
Current value
Step 2 : Enter new target value Exp：20.25mm
0 2 5 2
Press
２０２５
１００００
Target value
Display
Current value
Step 3 : Press to complete .
※ The LED lamp is blinking – ready for positioning.
START
Press to start the positioning or press to cancel.
START
STOP