- 9 -
Form: MM-
4/A5SC Revised 07/13/16
- SERVICE -
DO NOT run the drill unit while you make adjustments and repairs unless the procedure is approved.
Escaping fluid and air under pressure can have sufficient force to penetrate the skin causing serious personal
injury.
If injured by escaping fluid or air, see a doctor at once. Serious infection or reaction can develop if proper medical
treatment is not administered immediately.
Before disconnecting lines, be sure to relieve all pressure. Before applying pressure to the system, be sure all
connections are tight and that lines, tubes and hoses are not damaged.
DO NOT use your hand to search for leaks.
Use a piece of cardboard or wood to search for suspected leaks.
Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts.
Use of unauthorized parts or failure to follow maintenance instructions may create a risk of injury.
To Next Page
Loading...
