3-57
8. Auxiliary Functions
Making Copies
Chapter 3
Touch [Erase/Frame Erase].
Load the originals.
Select the desired erase function
(“Position”).
Useful Tip
If you want to place the original in a direction
other than the standard, see “[Original
Direction] key.”
☞
p.3-38
Hold down [▼]or[▲] until the desired erase
width is reached.
Useful Tip
You can change the erase width in 1/16
increments within the range 1/4 to 3/4.
Touch [Enter].
NOTE
The erase width represents that on the original,
not on the copy. So, use care when making a
reduction or enlargement copy.
Example: Erasing the margin of a 11
×
17 size
original on a copy reduced by
×
0.5:
If you want to erase the 1/2-wide margin on the
original, select 1/2 for the erase width.
Using a Particular Edge/Frame Erase
Function
1
4003P092CA
2
3
4003P393EA
4
4003P394EA
5
1166O255AA
Original (11×17 L)
×0.5
Copy (5-1/2×8-1/2 L)
1/4
1/2
To Next Page
Loading...
