6-8
When a Message Appears
Chapter 6
3. When the Message “Stapler is empty.” Appears
Replacing the Staple Cartridge
Holding the Grip, slide the Finisher away
from the machine.
Open the Front Door.
Slide out the Staple Unit.
While pressing down the Staple Cartridge
Lever, pull the Staple Cartridge out its port.
Pull the staple sheet about 1-1/4 inches out of
the new Staple Cartridge and break off that
portion.
Finisher FN-5
The message shown on the left appears when the
staples are running out.
Replace the Staple Cartridge with a new one by
following the procedure given below.
4003P487EA
1
4002O187AA
2
4002O339AA
3
1155O068AA
4
1155O069AA
5
1136O012AA
To Next Page
Loading...
