Minolta DI450 - Job Memory Input and Job Recall

5-2
Using the Utility Mode
Chapter 5
1. Job Memory Input and Job Recall
Job Memory Input
Up to 10 different, frequently used copy job programs can be stored in memory and recalled later as
necessary. When the machine is equipped with an optional Hard Disk Drive Kit and if “100 Accounts” is
selected for “Copy Track” of “Administrator Mode” available from Utility Mode, up to 10 different jobs
can be stored in memory for each account.
Set up the job you want to store in memory.
Press the Utility key.
Touch [Job/Image/Scan Input].
Touch[JobMemoryInput].
Touch [Input] and then select any one of the
10 job number keys from [1] to [10] marked
with .
NOTE
A job number key not marked with
indicates that a job has already been stored
under that number. If you store a new job in that
number key, the old job is erased.
To check for the details of the job stored,
touch [Check] and then touch the job number
key.
Storing a Job
1
2
4002O282CA
3
4003P142CA
4
4003P143CA
5
4003P144CB
6
4003P145CB