3-8
2. Placing the Original
Making Copies
Chapter 3
Using the SADF Mode
<Only when the Electronic Document Handler is mounted>
This is the mode in which you insert your originals one by one into the Electronic Document Handler to
make a copy or copies from it. When you insert the original, the machine automatically starts the copy
cycle.
NOTES
• The following originals can be used for the SADF mode.
Types of Originals : Sheets (Plain paper)
Weight : 9-1/4 to 41-3/4 lb
Size : 11
×
17L to 5-1/2
×
8-1/2
• The following features will be canceled when using the SADF Mode. :Auto Paper, Auto Zoom, Staple,
Hole Punch, Folding, 2-sided Original, Book, 2-in-1, 4-in-1, Booklet Creation, Cover, Page Insertion,
OHP Interleaving, File Margin, Image Repeat, and Mixed Orig. Detection.
Open the Single Feed Tray and slide the
Guide Plate to the size of the original.
Insert the original face down into the tray.
NOTES
• Be sure to place one original at a time.
• Be sure to correct any fold or curl in the
original beforehand.
The original is automatically taken up and
the copy cycle is started.
1
4002O131AC
2
4002O132AD
3
To Next Page
Loading...
