3-64
8. Auxiliary Functions
Making Copies
Chapter 3
Image Stamping
<Only when the Hard Disk Drive Kit is mounted>
The preprogrammed image can be checked in
advance.
Touch [Image Stamping].
Touch [Check] and select the image to be
checked.
Select the desired paper and press the Start
key.
NOTE
It is not possible to check the preprogrammed
image if a job has been reserved.
Useful Tips
• A preprogrammed image can be stored in
memory using Utility.
“Image Memory Input.”
☞
p. 5-6
• A preprogrammed image can also be checked
using Utility.
“Checking the Programmed Image.”
☞
p. 5-9
Checking the Preprogrammed Image
1155O553AA
Image Stamping lets you place a preprogrammed
image at a specified location on the copy.
* The image can be placed at up to three
places.
Orig.
Copy
1
4003P111CA
2
4003P412EB
3
4003P413EA
To Next Page
Loading...
