3-69
10. Selecting the Job Functions
Making Copies
Chapter 3
Reserve
<Only when the Hard Disk Drive Kit is mounted>
*As the machine completes scanning for a regular copy job, it is capable of scanning for another job
which is held in reserve.
When the machine completes the copy cycle for the first job, it automatically starts the copy cycle for the
reserved job.
By job, we mean a sequence of operation from original loading to the end of the copy cycle.
NOTE
Reserve is disabled if the machine is equipped with the optional Plug-In Counter.
Touch [Reserve] on the Touch Panel.
Load the originals and make the necessary
settings.
Press the Start key, and the machine starts
scanning the originals and the job is
reserved.
NOTES
• The number of copying jobs that can be stored
is a maximum of 5 or about 2000 sheets of
Letter standard original.
• Jobs are copied in order of reservation.
• For a job to be reserved, Manual Bypass cannot
be selected.
Reserving a Job
1
4003P122CA
2
4003P123CA
3
To Next Page
Loading...
