3-4
Making Copies
Chapter 3
2. Placing the Original
Using the Electronic Document Handler
<Only when the Electronic Document Handler is mounted>
The Electronic Document Handler automatically feeds in sheet originals placed on the Document
Handling Tray one by one. After the copy cycle has been completed, it automatically ejects the original
onto the Document Exit Tray.
Types of Originals: Sheets (Plain paper)
•1-sided Original (weighing 13-1/4 to 29-1/4 lb)
•2-sided Original (weighing 16 to 24 lb)
•Mixed Original Detection mode (weighing 16 to 24 lb)
Original size : 1-Sided Original, 2-Sided Original Mode
:11×17 L to 5-1/2×8-1/2 L
Mixed Original Detection mode
:11×17 L to Letter
• Typing paper, paraffin paper, heat-sensitive paper, and other thin paper
• Thick paper
• Originals greater than 11×17 L or smaller than 5-1/2×8-1/2 L
• Transparencies, translucent paper
• Wrinkled, dog-eared, curled, or torn originals
• Clipped or stapled originals
• Carbon-backed originals
* For any of these types of originals, place the original manually on the Original Glass to make a copy.
☞ p.3-6
Paper Suitable for Use as Originals
Paper Not Suitable for Use as Originals
To Next Page
Loading...
