Minolta DI450 - Administrator Mode; Selecting the Administrator Mode

5-18
Using the Utility Mode
Chapter 5
5. Administrator Mode
This mode is used only by the administrator of your machine. When Administrator Mode is selected, the
machine prompts you to enter your “Administrator’s #.” The following functions can be set only when
the correct administrator number is entered.
NOTES
• The administrator number is to be programmed by your Tech. Rep. Ask him/her for more details.
• The administrator of this machine should remember the administrator number.
Selecting the Administrator Mode
Press the Utility key.
Touch [Administrator Mode].
Enter the administrator number from the 10-
Key Pad and touch [Enter].
The Touch Panel now shows the detailed
functions that can be set under Administrator
Mode.
1
4002O282CA
2
4003P172CA
3
1149O235AC
4
4003P473EA