3-71
10. Selecting the Job Functions
Making Copies
Chapter 3
Delete allows you to delete a job previously set.
<To delete a job on the copy queue>
Touch [Delete].
Touchthejobno.keytobedeleted.
Touch [Yes].
Touch [Exit].
<To delete a job being scanned or printed>
Press the Stop key while the job in queue is
being scanned or printed.
Touch [Delete Printing Job] or [Delete
Scanning Job].
Useful Tip
Pressing the Stop key stops the scanning or
printing action being performed.
Press the Start key.
Delete
1
4003P128CA
2
4003P129CA
3
4003P130CA
4
1
4002O314CA
2
4003P131CA
3
To Next Page
Loading...
