6-43
5. When a Staple Misfeed Occurs
When a Message Appears
Chapter 6
Align the arrows and firmly push the Staple
Unit down into the well.
Press and turn the knob to lock the cover.
NOTES
• A maximum of about ten stapling sequences
may run idly without driving staples in paper
immediately after clearing the staple misfeed.
During this time, the Staple Unit advances the
staple sheet to the required stapling position.
• If the Finisher does not staple after clearing the
staple misfeed, call your Tech. Rep.
9
1166O131AB
10
1155O767AA
To Next Page
Loading...
