3-26
5. Selecting the Finishing
Making Copies
Chapter 3
<Only when the Finisher FN-5 is mounted>
Open Staple Tray Cover [FN10].
Align the sheets of paper neatly.
Insert a neat stack of paper face down into
the Staple Tray.
NOTES
• Make sure of the stapling position and press the
paper stack against the end bracket.
• Up to 50 sheets of plain paper can be stapled.
Slide the Paper Guide Plate to the size of the
paper.
NOTE
Make sure that the Paper Guide Plates are in
touch with the edge of the paper stack.
CloseStapleTrayCover[FN10].
After you hear the sound of mechanism
stops, select the desired stapling type on the
Finisher Panel.
Manual Staple
1
1155O033AA
2
1134O039AA
3
1155O036AB
4
1155O034AA
5
1155O035AA
6
1155O037AA
To Next Page
Loading...
