3-55
8. Auxiliary Functions
Making Copies
Chapter 3
Touch [File Margin].
Load the originals.
Select the desired “Position” of the margin.
Hold down [▼]or[▲]until the desired
margin width is reached.
NOTE
Having a margin width larger than necessary
could result in part of the image missing on the
copy. Try to keep a logical margin width.
Useful Tip
You can change the margin width in 1/16
increments within the range 0 to 3/4.
Touch [Enter].
Useful Tips
• If the margin position is set to Left and width to
0, the image on both the front and back sides of
the copy has the same orientation as that on the
original.
• If the margin position is set to Top and width to
0,theimageonthe2ndsideofthecopyis
inverted to that on the 1st side.
Using File Margin
1
4003P089CA
2
3
4003P390EA
4
4003P391EA
5
4002O013AB
Orig.
Copy
4002O048AB
Orig.
Copy
To Next Page
Loading...
