Minolta EP1030 - Page 12

5. Wipe clean the 4th and 5th Mirrors with a soft cloth.
1. Wipe clean the 1st Mirror with a soft cloth.
Swing down the Front Door.
Release and swing up the Upper Half of the copier.
Remove three screws and the Rear Cover.
Clean the Cooling Fan Filter using a brush or a vacuum
cleaner.
2. Wipe clean the 2nd Mirror with a soft cloth.
SPN S|
1159D080AA,
1159D065AA
3. Wipe clean the 3rd Mirror with a soft cloth.
Remove the Upper Right Cover.
Swing down the Front Door.
Release and swing up the Upper Half of the copier.
Remove three screws and the Rear Cover.
Remove the 17 connectors from the PWB-A.
Be
1159D061AA
1. Remove the Original Glass.
Remove two screws and the Optical Cover. i
3. Remove two screws and the Lens Cover. |
6. Remove the PWB-A.
7. Remove the three screws and the Ozone Fan Motor Assy.
| 1159D067AB
4. Gently dust off the surface of the Lens using a soft cloth. 8. Free the Mylar.
1159D0B9AA
D-16
:
D-17