Minolta EP1030 - Synchronizing Roller Control

1159S8M1703A
17-3. Synchronizing Roller Control
The Synchronizing Rollers are started as Registration Clutch CL1 Is energized upon re-
ception of an Image Leading Edge signa! from PWB-A:
{ 500 ‘
rd 1
Paper
Transport
Sensor
ON
a
(PC2)
OFF
472.7
ON
1
545
Cli
OFF
|
(PC11)
OFF
:
-
H
ON
t
Scan
Orive
J
OFF
‘
Unit : msec.
1158TOOMCA
|| Controt Signal Energized | Deenergized | WIRING DIAGRAM
pweaPu7atg | ot | ok [2D
| | Control Signal Blocked | Unblocked | WIRING DIAGRAM
PWB-A PJ3A-2 aad eeeceee ene
M-44
1159SBM1B00A
isa PAPER TRANSPORT
After having gone through the imagetransferand paperseparation processes, the paper
is then transported along the guide plate to the Fusing Unit. There is a resistor provided
between the guide plate and frame to prevent void images.
Guide plate
Resistor
( 1159M027AA
M-45