Minolta EP1030 - Copier Performance and Environmental Specs

MULTIPLE COPIES : Up to 99 copies (in SDH mode)
WARMING-UP TIME
| 115V | 9.9 sec. |
120V
220v | 10.9 sec. |
FIRST COPY SPEED
Inch Areas 6.4 sec. or less (8-1/2” x 11”L)
6.5 sec. or less (A4L)
CONTINUOUS COPY SPEED (copies/min.)
Zoom ratio x 1.00, paper fed from Universal Tray
<Normal Mode> <SDH Mode>
ZOOM RATIOS
<EP1031/EP1031F>
| Inch Areas | Metric Areas |
Full Size
. Reductions
Fixed Ratios
Enlargements
Variable Ratios x0.64to xl.56 (in x 0.01 increments)
<EP1030/EP1030F> : Full size (x 1.00) only
LENS Through Lens (F = 7.5, f = 165 mm)
EXPOSURE LAMP — : Halogen Frost Tube Lamp
FUSING 200°C/190°C
TEMPERATURE
G-2
POWER/CURRENT CONSUMPTION (Copier only)
1415V| 120v | 1277 | 220v | 230V | ~~ 240v
80V 80V 80V 160V 160V 160V
200w 200w 200w 200w 200w 2o0ow
Fusing Heater 230V 230V 230V
(Rating) 850W | 850W | 850W
Max. power consumption 1040w | 1120w | 1220W g9ow | 1060W | 1130W
In standby 290w | 320w | 360w | 280w | 300W 330W
[9.34 195A | 9.98 | 46a | 4.7A [4.84
Exposure Lamp
(Rating)
Max. current consumption
POWER : 115 to 127V, 60Hz
REQUIREMENTS 220 to 240V, 50/60Hz
ENVIRONMENTAL REQUIREMENTS
| Temperature ] 40 to 35°C (50 to 95°F) (Temperature Gradient 10°C/h or less)
| Humidity [45 to 85%RH (Humidity Gradient 20%RH/h or less)
| Ambient Illuminance 300 lux or less
| Inclination 14° or less off horizontal |
Copier Dimensions (mm)
| Width Depth Height*
EPG
feptoote | se «| ~SiYC*d
Pe a ee ee eed
| With Depth Height*
EP 030
jeprosor | sg] |
*Including SDH (For a copier not equipped with an SDH, up to the document surface
level)
COPIER WEIGHT (excluding Copy Tray, starter, toner, and copy paper)
WITH SDH : 25 kg
WITHOUT SDH : 22 kg
ACCESSORIES : Operatoris Manual, Setting-up Instructions, Exit Tray
G-3