Minolta EP1030 - Page 74

1159SBM2404A
24-4. SDH Mode
e When in the SDH mode, the Scanner is moved to, and fixed at, the SDH exposure
position and scans the document as the document is transported above the Scan-
ner.
Document Exit Roller
Document
Registration Roller
Document Transport
Roller 2 Document Transport
Roller 1
1459MO036AA
Scanner
When feeding two sheets of Documents
Start of scan Start of scan
SDH Drive Motor ON
(M10) OFF med 145msec. ' Passing of SDH L
<_——— 5 Exposure Position
1
{
SDH Paper Take-Up ON H
Solenoid (SL1 0) OFF
H
SDH Ragistration ON
Clutch (CL1 0) oFF
SDH Paper Transport
Sensor (PC23)
SDH Original
Exit Sensor (PC24)
Li {
1159T12MCA
| Control Signal | Blocked | Unblocked | WIRING DIAGRAM
PWB-A PJ1A-10
PC24 | PWB-A PJ1A-9
[ Control Signal Energized Deenergized | WIRING DIAGRAM |
MIO | PWB-A PJIA-8 L H 9-B
| stio | PWB-A PUIAG | Lo UH | 11-¢ l
| CL10 | PWB-A PuA7 | LI oH | 11-D |
1159SBM2500A
yxy MEMORY BACKUP
Counter value and Data of Teck. Rep. Mode or User Mode are memorized into the IC3
(EEPROM) on the Master Board PWB-A.
M-59