FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-17
<Procedure>
1. Press the Meter Count key. Then, press the following keys in this order.
2. From the 10-Keys, press the number corresponding to the service mode no. assigned.
3. Perform the necessary steps for the function selected.
<Leaving the Service Mode>
• Press the Panel Reset key twice to go back to the Basic screen.
5-2. Entering the Service Mode
Pressthe
Stop key.
➡ Press “0.” ➡ Press “0.” ➡
Pressthe
Stop key.
➡ Press “0.” ➡ Press “1.”
Paper Size Input
Parts/Supplies Life Counter
Malfunction Counter
Misfeed Counter
PM Counter and Ports/Options Counter
~
ServiceModeNo.4
✽
For 23 cpm Copier only
ServiceModeNo.5
ServiceModeNo.6
ServiceModeNo.7
ServiceModeNo.8
ServiceModeNo.9
ServiceModeNo.0
Service
Mode
Paper Size Counter
Display
To Next Page
Loading...
