FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-25
• This function allows the Tech. Rep. to change the fixed zoom ratios over the range
between ×0.500 and ×2.000 according to the needs of the user.
<Setting Procedure>
1. Select the Altering Fixed Zoom Ratios function.
2. SelecttheparticularfixedzoomratiotobechangedandpresstheClearkeytoclearit.
NOTE
If the zoom ratio is cleared mistakenly, press the Panel Reset key to undo the clearing oper-
ation.
3. Enter the desired zoom ratio from the 10-Keys.
4. Press the Start key to validate the new zoom ratio.
• This function shows the counts of the PM Counter (IU) and Ports/Options Counter. The
particular port or option is indicated by the corresponding LED of the Misfeed Monitor.
The count is shown across the “Zoom Ratio Indicator” and “Multi-Copy Display.”
NOTE
The PM Counter is indicated by the IU Service Life Indicator LED.
Counting System
• PM Counter: Count-down type (When the counter has counted down to zero, a − (minus)
sign appears in the Zoom Ratio Indicator and the count is thereafter incremented.
• Ports/Options Counter: Count-up type
<Setting Procedure>
1. Select the PM Counter and Ports/Options Counter function.
2. Each press of the Paper Select key lights up a new LED representing the new counter
in the following order.
[23 cpm Copier]
NOTE
PF-112, if the copier is so equipped, is indicated by the 3rd Drawer LED only.
(3) Altering Fixed Zoom Ratios (For 23 cpm Copier Only)
(4) PM Counter and Ports/Options Counter
Example) Count: 12345
Multi-Copy Display
123
Zoom Ratio Indicator
45
Order Description Order Description
1
2
3
4
5
PM Counter
1st Drawer
2nd Drawer
3rd Drawer (Paper Feed Cabinet)
4th Drawer (Paper Feed Cabinet)
6
7
8
9
10
Manual bypass
Duplex take-up
Sorter
Stapling
ADF
[18 cpm Copier] [15 cpm Copier]
Order Description Order Description
1
2
3
4
5
PM Counter
Copier paper source
Manual bypass
Sorter
ADF
1
2
3
PM Counter
Copier paper source
Manual bypass
To Next Page
Loading...
