FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 TROUBLESHOOTING
98.05.15
T- 6 8
(4) Foggy background
Cause
Step
Check Item
Result
Action
Cleaning failure
1
Is the Cleaning Blade dirty
with foreign matter, paper
dust, etc. or is it scratched?
YES
Change the Cleaning
Blade.
Optical failure 2 Is the mirror or lens dirty? YES Clean the mirror or lens.
PC Drum failure
3
Is the PC Drum dirty with
foreign matter, etc.? YES
Clean or replace the PC
Drum. Replace the Clean-
ing Blade if necessary.
4
Is the PC Drum properly
grounded?
NO
Clean or replace the PC
Drum Ground Plate.
Developing failure
5
Is the Sleeve Roller abnor-
mally dirty?
YES
Clean the Sleeve Roller.
Check the Developer Scat-
tering Prevention Seal to
seeifitisdeformedordirty.
6
Is the developing bias con-
tact normal?
NO
Clean or replace the devel-
oping bias contact.
Main Erase Lamp
failure
7
DoestheMainEraseLamp
light up properly?
NO
Replace the Main Erase
Lamp.
8
IstheMainEraseLampdirty?
YES
Clean the Main Erase Lamp.
To Next Page
Loading...
