Minolta EP2030 - 13 PAPER TAKE-UP;FEED SECTION (2 ND DRAWER: 23 Cpm COPIER ONLY

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 MECHANICAL/ELECTRICAL
98.04.24
M-43
1174SBM1300A
The copier is equipped with two Paper Drawers, 1st and 2nd, that can be slid out to the
front of the copier. Each can hold up to 250 sheets of paper.
The 1st Drawer is a universal paper size type, while the 2nd Drawer is a fixed paper size
type.
Paper Sizes That Can be Loaded
13
PAPER TAKE-UP/FEED SECTION (2ND DRAWER: 23 cpm COPIER ONLY)
Marketing
Area
Switch
S66
1st Drawer 2nd Drawer
Inch
Areas
Inch
5.5” × 8.5”, 8.5”× 11”, 8.5” × 14”,
11” × 8.5”, 11” × 14”, 11” × 17”
8.5” × 11” [LETTER], 11” × 8.5”
[LETTER], 8.5” × 13” [G.LEGAL],
8.5” × 14” [LEGAL],
11” × 17”, 5.5” × 8.5” [INVOICE],
8” × 10.5” [G.LETTER]
10.5” × 8” [G.LETTER], 8-1/4” × 13”,
10” × 14”, 11” × 14”, 210 × 280,
280 × 210, 216 × 297, 216 × 320,
220 × 280, 220 × 330, 280 × 420
Metric
A5L, A4L, A4C, A3L
8” × 13”, 8.5” × 13” [G.LEGAL]
8-1/4” × 13”
Paper Take-up
Solenoids (SL2, SL3)
Paper Empty Sensors (PC101, PC102)
1st Drawer Set
Detecting Switch
S65
Paper Take-Up Sensors (PC55, PC56)
Paper
Take-Up Rolls
1151M004YA
Marketing
Area Switch
S66
Paper Size
Detecting Switches
(S61 ~ S64)
2nd Drawer Set
Sensor PC69
1st Drawer
(Universal Paper Size)
2nd Drawer
(Fixed Paper Size)