Minolta EP2030 - SPECIFICATIONS; Specifications of EP2030

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
G-1
1174SBG0100A
1174SBG0101A
COPY MEDIUM
❍: Permissible
–: Not permissible
1 SPECIFICATIONS
1-1. Specifications of EP2030
TYPE : Desktop
PHOTOCONDUCTOR : Organic Photoconductor
COPYING SYSTEM : Electrostatic Indirect Image Transfer to Plain Paper
PAPER FEEDING
SYSTEM
: 3-Way Feeding 1st Drawer: Universal Tray
(250 sheets of paper)
2nd Drawer: Fixed Paper Size Tray
(250 sheets of paper)
Multi Bypass Table
EXPOSURE SYSTEM : Mirror Scanning, Slit Exposure
DEVELOPING SYSTEM : Minolta New Micro-Toning System
CHARGING SYSTEM : Comb Electrode DC Negative Corona with Scorotron Sys-
tem
IMAGE TRANSFER
SYSTEM
: Visible Image Transfer by means of a Single-Wire DC
Negative Corona with Corotron System
PAPER SEPARATING
SYSTEM
: AC Corona with Corotron System, plus
Paper Separator Finger
FUSING SYSTEM : Heat Roller
PAPER DISCHARGING
SYSTEM
: Charge Neutralizing Brush
MAXIMUM ORIGINAL
SIZE
: Metric-A3L; Inch-11” × 17”L (L: Lengthwise)
1st Drawer
(Automatic
feeding)
2nd Drawer
(Automatic
feeding)
Multi Bypass Table
Medium
Plain paper
(60to90g/m²)
❍❍❍
Translucent paper – – ❍
Transparencies – – ❍
Thick paper
(91 to 157 g/m²)
––❍
Recycled paper ❍❍❍
Dimensions
Maximum
(Width × Length)
297 × 432 mm 297 × 432 mm 297 × 432 mm
Minimum
(Width × Length)
140 × 182 mm 140 × 182 mm 100 × 140 mm