Minolta EP2030 - Imaging Unit; Disassembly, Cleaning, Replacement and Starter Changing of the Imaging Unit

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-31
Replacement of the PC Drum
Replacement of the Toner Scattering Prevention Plate
2-6. IMAGING UNIT
(1) Disassembly, Cleaning, Replacement and Starter Changing of the Imaging Unit
1. Remove the Imaging Unit from the copier.
2. Remove two screws and the Imaging Unit Cover.
1151D044AA
3. Remove one screw and the PC Drum Charge
Corona Unit.
1139D151AA
4. Remove two screws and one Drum Pin to remove
the PC Drum.
NOTE
Whenever the PC Drum has been replaced, be sure to
make the
“ Adjustments of the Optimum Exposure Set-
ting in the Manual and Auto Mode.
” See pp. D-55 to D
-
56.
1139D152AA
5. Remove one screw, one shoulder screw and the
Toner Scattering Prevention Plate.
1139D153AA