Minolta EP2030 - Page 118

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-21
[Service Mode Tech. Rep. Choice]
Choice No.
Setting (The default is .)
C-2 <Total Counter Counting>
Select the conditions (paper size and 2-sided copying) by which the
Total Counter count is increased.
NOTE
See the Count-up Table for details.
<Count-up Table>
0: No count 1: 1 count 2: 2 counts 4: 4 counts
C-4 <Maintenance Call Reminder ON/OFF>
Select whether to enable or disable the maintenance call reminder.
Highlighted
Data 1 2
Description
1 count per 1
copy cycle
Multiple count-up Multiple count-up
0
Copying 1-Sided 2-Sided
Manual
Bypass
Size
Sizes
otherthan
those set
Set sizes
Sizes
otherthan
those set
Set sizes
Total
Mode Mode Mode Mode
012012012012
Total (mechani-
cal, electronic)
1 122 2 244 1
Size
(electronic)
0 112 0 220 0
2-Sided Total
(electronic)
0 0 112114 0
2-Sided Size
(electronic)
0 0 0 114 0
Plug-In
(mech
anical)
Count-
ing
copies
1 122122144 1
Count-
ing
copy
cycles
1 122 2 244 1
Data 1
Description
The maintenance call
reminder is not given.
The maintenance call
reminder is given.
0