FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-17
12. Remove four screws and the Separator Guide
Plate Unit.
1139D103AA
1139D104AA
NOTE
When reinstalling the Separator Guide Plate Unit,
press the parts shown on the left up against the copier
frame (both at front and rear).
13. Remove two screws and the Lever.
1139D105AA
14. Snap off one C-clip and remove the Separator Unit.
NOTE
•
Please use tweezers when reinstalling the C-clip.
1139D106AA
1139D107AA
15. Snap off one C-clip and remove the Separator Roll
Assy.
To Next Page
Loading...
