FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 MECHANICAL/ELECTRICAL
98.04.24
M-17
1174SBM0800A
To prevent a black band from occurring across both the leading and trailing edges, and
along the front and rear edges, of the electrostatic latent image, 31 LEDs of the Image
Erase Lamp are turned ON before development takes place, thereby reducing to a mini-
mum the unnecessary potential on the surface of the PC Drum. Because of the light path
involved, this copier has the edge erasing cycle between drum charging and exposure.
The position of the Image Erase Lamp can be adjusted using the adjusting screw on the
front of the copier.
8 IMAGE ERASE LAMP
1139M031AA
PC Drum Charge Corona
Image Erase Lamp LA3
Exposure
1139M032AA
Copier Rear
Frame
Copier Front Frame
Adjusting Screw
Image Erase Lamp
Compression
Spring
Image Erase Lamp
To Next Page
Loading...
