Minolta EPI 054 - 14-3.Paper Separating Mechanism; 14-4.Paper Empty Detection

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
M-56
1174SBM1403A
The paper separating mechanism ensures that only the top sheet of paper is fed in by sep-
arating the second sheet of paper from the top one. This is accomplished by the Torque
Limiter fitted to the Separator Roll shaft which stops the Separator Roll when there is a
change in friction between the Feed and Separator Rolls.
1174SBM1404A
The Multi Bypass Table is equipped with a Manual Feed Paper Empty Sensor which detects
a sheet of paper at the manual bypass port.
14-3. Paper Separating Mechanism
14-4. Paper Empty Detection
Control Signal Blocked Unblocked WIRING DIAGRAM
PC31 PWB-A PJ5A-6B L H 17-H
1139M092AA
Actuator
Paper Take-Up Roll
Manual Feed
Paper Empty Sensor
PC31
Paper Stopper