FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-13
(5) Disassembly of the Suction Unit
1. Remove the four Suction Drive Rolls and six bush-
ings by pulling them in the direction of the arrow.
1151D004AA
2. Snap off the three E-rings from the Suction Drive
Unit.
3. Remove the gear and bushings.
1139D094AA
4. Remove the Pre-Fusing Guide Plate.
5. Remove the Suction Drive Unit.
1151D005AA
6. Remove the four belts.
1151D006AA
7. Remove the Suction Fan.
1151D009AA
To Next Page
Loading...
